- Compact & High Performance (0.00D-6.0D)
- Supports measurement of Density・Positive Dot Area%・Negative Dot Area%・Transmittance
- Easy operation
- Accuracy check is possible with confirmation film
Features
High performance and easy operability
- Small portable and high performance, The measurement is possible just to push down an arm.
Measurement of A3 size film
- T5 plus is possible to measure up to the center part of A3 + size film
Connectable to PC etc.
- Since the main body has an RS - 232C output terminal, it is possible to transfer data with one cable.
Specifications
| Dimensions | 251mm(D)×103mm(W)×125mm(H) |
| Light Table | 80mm(W)×70mm(D) |
| Measuring Arm Length | 185mm |
| Weight | Approximately 1,200g |
| Power Source | AC adapter 9V-500mA, Built-in Rechargeable Battery 4.8V |
| Aperture | φ3mm、φ2mm、φ1mm |
| Measuring Range | Density 0.00D ～ 6.0D, Transmittance 100％～ 0.0001％, Dot Percentage 0.0 ～ 100.0% |
| Repeatability | ±0.01D (at<4.0D、φ3mm aperture) |
| Fringe correction | Supported |
| Power On/Of | Power on with any key operation, Auto power off function |
| Optical System | ANSI PH2.19(Specular-Diffuse) |
| Filter characteristics | Visual |
| Light Source | Halogen Lamp |
| Detector | Filter, Built-in Photo Diode |
| Interface | RS-232C(9,600bps, 8 Data bits, Non Parity, 1 Stop bit) |
| Warm Up Time | None |
| Accuracy | ±0.02D (at<4.0D、φ3mm aperture) |
| Display | 8 characters LCD |
| Operating Temperature Range | 5 ～ 40℃ |
| Standard Accessories | Aperture φ3mm,φ2mm,φ1mm, Calibration film,Confirmation film, AC 100V Adapter, Instruction Manual |
| Calibration | One touch zeroing operation, Slope (2 points) calibration using air and calibration film, It is possible to check the need for calibration with confirmation film |
