Coating device｜Applicator-Doctor Blade-Bar Coater

• This jig creates a coating of uniform thickness.
• The gap dimension of coating can be changed in 10 steps by adjusting the scale lines on the body. 
• The coating section is an eccentric bar, and a predetermined film thickness can be obtained by rotating the left and right scales to the guide indentations. 
• Excellent film thickness setting and workability. 
• Material: SUS-303,with cover case. 

By adjusting the knurled line scale (0.5 to 10) on the guide plates at both ends, a gap of 12.5μm to 250μm (standard type) can be selected in a stepless manner. Special types with coating thicknesses of 0 to 100 µm, 0 to 500 µm, 0 to 1 mm, 250 to 500 µm, 500 to 1000 µm, etc. can also be manufactured.

• This unit is a popular product with a fixed coating thickness.
• Each scale position of the Baker applicator is fixed specifically for this purpose, which provides a better effect for comparing the reproducibility of coating thickness. 
• Coating width: 50mm (standard product) Material :SUS-303.