Overview
- This product is a pressure gauge equipped with two pressure ports (HI and LOW) which measure and indicate pressure differences (compound pressure ± indication). The product is equipped with analog output and maximum and minimum contact output.
Feature
- Compound pressure can be measured (in full-scale range).
- Contact output enables a response to pressure control.
- Arbitrary scaling is available for DC 1 to 5V output.
- The product is equipped with external zero-adjustment and hold-input.
- Responds to intense measurements of pressure fluctuations using a set response rate (moving average.)
DPC-500N ±50.00 Pa DPC-201N ±200.0 Pa DPC-202N ±2000 Pa
Model description
Standard accessories
|
 |
Specification
| Item | DPC- | ||||||||
| 500N | 201N | 202N | |||||||
| Operating fluid | Non-corrosive gas | ||||||||
| Measurement range (Pa) |
± 50.00 | ± 200.0 | ± 2000 | ||||||
| Display method | 4-digit LCD display cycle 10 times/second | ||||||||
| Display range | ± 52.50 | ± 210.0 | ± 2100 | ||||||
| Resolution (Pa) | 0.01 | 0.1 | 1 | ||||||
| Measurement accuracy |
0.2%Fs ± 1 dig | 0.1%Fs ± 1 dig | |||||||
| Temperature characteristics |
± 0.2%Fs/℃ | ± 0.12%Fs/℃ | |||||||
| Moving average time | 0 to 20 sec | ||||||||
| Zero-adjustment input | No-voltage input | ||||||||
| Hold-input | No-voltage input | ||||||||
| Control Output |
ON/OFF | No-voltage input | |||||||
| HI contact GO contact LO contact |
AC250V 2A | ||||||||
| Analog output | DC 1-5V | ||||||||
| Applicable temperature range |
0 to 45°C (excluding AC adaptor) | ||||||||
| Power source | DC12V±10% | ||||||||
| Power consumption | 10W | ||||||||
| Dimensions (mm) | 96W×96H×141D | ||||||||
| Weight (kg) | 0.9 kg (excluding AC adaptor) | ||||||||
| Accessories | Mounting brackets 2 pieces Rubber foot 4 pieces AC adaptor 1 piece |
||||||||
